Search
Filters
Close
*
$254.00

The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion.

Aircraft respond well to the gap seals as they create a pressure barrier between the high pressure air on the bottom of the wing and the low pressure air on the top of the wing.  Gap seals will add 2-3 mph  to the plane, as well as 100-150 ft/min increase in rate of climb.  stall speeds will decrease in the 1-3 mph range.  Handling is greatly improved, especially low speed handling and stability.

 

Part Number:

34AIL    

Approval Basis:

Supplemental Type Certificate No(s) SA729GL

Replaces:

n/a

Aircraft Eligibility:

Piper PA-34-200

Typical Lead Time:

Stock

Typical Installation Time:

14 hours

Note: Installation times do not include painting

Finish:

Primed and ready for paint.

 

The seals are made of 2024T3 Alclad aluminum for lighter weight and superb strength. They're coated with a plastic anti-chaff strip where the seal comes into contact with the control surface to prevent any abrasion.

Aircraft respond well to the gap seals as they create a pressure barrier between the high pressure air on the bottom of the wing and the low pressure air on the top of the wing.  Gap seals will add 2-3 mph  to the plane, as well as 100-150 ft/min increase in rate of climb.  stall speeds will decrease in the 1-3 mph range.  Handling is greatly improved, especially low speed handling and stability.

 

Part Number:

34AIL    

Approval Basis:

Supplemental Type Certificate No(s) SA729GL

Replaces:

n/a

Aircraft Eligibility:

Piper PA-34-200

Typical Lead Time:

Stock

Typical Installation Time:

14 hours

Note: Installation times do not include painting

Finish:

Primed and ready for paint.

 

Products specifications
Product Type Exterior Parts
Products specifications
Product Type Exterior Parts